CASE 836C AWD
Price: 207,000 € WITHOUT TAX
Year of manufacture: 2024
Hours: ONLY 15 h
Weight: 12,800 kg
6-cylinder engine with 119 kW power output
MANUFACTURER'S WARRANTY: 12 months or 2,000 hours
Technical specifications for the CASE 836C (AWD) grader
Powertrain:
NEF diesel engine, 6-cylinder, type FPT F67 NEF STAGE V, common rail, turbocharged with intercooler, 6.7 L displacement, meeting the latest Stage V "Hi-eSCR2" emission standards; features a patented Selective Catalytic Reduction (SCR) system using AdBlue
Power in gears 1–3: 102 kW (138 hp) per ISO 14396/ECE R120;
Power in gears 4–6: 115 kW (156 hp) per ISO 14396/ECE R120;
Torque: 725 Nm at 1,400 rpm;
Full PowerShift transmission allowing gear changes under load;
Number of forward gears: 6 (Vmax = 39.9 km/h);
Number of reverse gears: 3 (Vmax = 29.2 km/h);
Torque converter with 1.87:1 ratio;
Tractive force: 85 kN
Hydraulic system:
▪ Variable-displacement piston pump, max. flow rate 94.5 l/min; ▪ Closed-loop load-sensing system operating at 200 bar ensures high operational precision;
▪ System capacity – 185 l;
Drivetrain – all-wheel drive:
Hydrostatic front-wheel drive with E.D.C.V. (Electronic Drive Control Volume) system, engaging in addition to the hydrodynamic rear-wheel drive. Bi-directional pump controlling motors located in the front wheel hubs. No-Spin hydraulic differential regulating torque and preventing wheel slip. Microprocessor monitors and adjusts the drive force distribution between front and rear wheels. Stepless control allows the operator to adjust front-wheel tractive force to current operating conditions. Creep mode as standard: front-wheel-only drive for maintaining very low travel speeds.
▪ Hydraulically controlled steering system;
▪ Turning radius (outer wheel edge) – 6.6 m;
▪ Six equal-sized wheels with 405/70 R20 tires;
▪ Wet disc braking system acting on the four rear wheels;
▪ Driven front axle (6WD):
▪ Hydrostatic front-wheel drive controlled by an electronic system managing rotational speed (EDCV); Axle oscillation – ± 15°;
Wheel tilt – ± 21.45°; Wheel steering angle (left/right) – ± 40°;
Frame articulation – ± 28°; Ground clearance – 0.485 m; ▪ Tandem rear axle:
Axle oscillation – ± 15°;
Automatic "No-Spin" differential lock;
4-wheel drive via chain drive;
Circle assembly:
▪ 360° rotation capability;
▪ Circle diameter – 1.15 m;
▪ Enclosed circle assembly with internal bearing lubrication, preventing contaminant ingress;
Electrical system and cab:
▪ 24 V voltage;
▪ 90 A alternator;
▪ 2 x 100 Ah battery;
▪ "Cold start" system to facilitate engine starting in low temperatures;
▪ Spacious, comfortable ROPS/FOPS cab equipped with air conditioning, work lights, adjustable steering column, comfortable fully adjustable operator seat, and doors on both sides;
Operating parameters:
▪ Rear-mounted ripper;
Ripper width – 2.0 m;
Working depth – 0.361 m;
▪ Parallel-lift front blade;
Width – 2.35 m;
Height – 0.765 m;
Ground clearance under blade – 0.509 m;
Working depth – 0.136 m;
▪ Moldboard (center blade);
Width – 3.355 m;
Height – 0.526 m;
Working depth – 0.456 m;
Ground clearance under blade – 0.394 m; Tilt angle – 49.5°;
Left shift – 0.708 m;
Right shift – 0.491 m;
Reach to the left (without frame articulation) – 1.525 m;
Reach to the right (without frame articulation) – 1.865 m;
Reach to the left (with frame articulation) – 2.15 m;
Reach to the right (with frame articulation) – 2.49 m;
Lift angle to the left – 76°;
Lift angle to the right – 117°;
▪ Operating weight – 12,800 kg;
▪ Height – 3.24 m;
▪ Max. length – 8.961 m;
▪ Width – 2.36 m (across tires);
Additional equipment included in the price:
▪ Heated FOPS/ROPS cab with air conditioning,
▪ Comfortable, heated, air-suspended operator seat,
▪ All-wheel drive (AWD) 6x6 (front and rear),
▪ Parallel front blade,
▪ Mid-mounted blade (width: 3,355 mm, height: 522 mm) – FLOAT function,
▪ 5-shank rear ripper,
▪ Reversing alarm,
▪ Road lighting kit,
▪ LED work lights,
▪ Orange warning beacon,
▪ Reversing camera.
Price: 207,000 € WITHOUT TAX
We also offer a version controlled by joysticks.
