Semi-remorque surbaissé Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel neuf à vendre - ID: 6234709
France - Français | EUR
00
S'identifier / s'inscrire
Catalogue
Vendre
Déposer une annonce

Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel

Semi-remorque surbaissé neufFaymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel
Neuf|3-essieu|35695 kg|48000 kg
Contacter le vendeur

Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel

Publié: 1an(s) 8mois

Ajouter aux Favoris
PDF
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 1
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 2
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 3
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 4
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 5
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 6
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 7
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 8
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 9
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 10
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 11
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 12
Semi-remorque surbaissé neuf Faymonville MAX Trailer 3-Achs-Tele-Semi mit Rampen zwangsgel: photos 13
Ask for all available pictures

Publié: 1an(s) 8mois

Ajouter aux Favoris
PDF
Contacter le vendeur
Neuf

Poids total à charger

48000 kg
Capacité de chargement

35695 kg
Largeur

2540 mm
Hauteur

860 mm
Сouleur

gris
Stationnement

Allemagne, Martener Hellweg 100, 44379 Dortmund, Germany

Avez-vous besoin d'expédition?

LIVRAISON
Rappeler
Châssis/suspension
suspension

air
châssis téléscopique

nombre d'essieux

essieu relevable

essieu de direction

ABS

EBS

Carrosserie
longueur de chargement

9300 mm
largeur de chargement

2540 mm
hauteur de chargement

860 mm
Demander plus d'information
Inspection avant achat
Plus d'information

Gooseneck:

Gooseneck with rear chamfer approx. 750 mm x 10°.

3 pairs of lashing rings (LC 5.000 daN).

Hardwood floor 30 mm thick.

Loading floor in telescopic design:

Loading floor in telescopic design with rear chamfer of approx. 1.000 mm x 8°.

5 pairs of lashing rings, foldable outwards (LC 5.000 daN).

3 pairs of lashing rings, foldable outwards (LC 10.000 daN).

1 pair of lashing rings, lying at the front of the loading floor (LC 10.000 daN).

Hardwood floor approx. 48 mm thick, over the axles checker plate.

Two-part steel ramps:

1 pair of two-part steel ramps (galvanized) approx. 2.750 + 1.400 x 800 mm with hardwood floor approx. 48 mm thick.

Ramps with hydraulically foldable parts, hydraulic lifting and lowering and hydraulically movable.

Maximum load per pair: 40.000 kg

Landing legs:

JOST landing legs (mechanical) with 2-gears for 24t lifting capacity (50t test load).

Axles and tyres:

BPW-axles and suspension, all axles with hydro-mechanical forced steering.

Technical axle load: 12.000 kg.

Air suspension with lifting and lowering valve.

Axle tools.

Tyres 235/75 R 17,5.

Braking system:

Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the truck.

Steel construction:

Steel construction made of high-strength fine-grained steels.

Steel quality:

S355J2+N/S355MC (yield strength 355MPa)

S690QL/S700MC (yield strength 690MPa)

Painting:

First-class and long-lasting corrosion protection of the standardly shot-blasted welding frame is guaranteed through a 2K-zinc dust priming. A high-grade single-colour 2K-topcoat in RAL colour.

Chassis: MB 7350 nova grey.

Tail part is metalized and painted in RAL 9010 (pure white).

No metallic painting possible.

Electrical system:

Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3)

ASPÖCK-UNIBOX at the front bar with sockets 2x 7-pin & 1x 15-pin.

Additional equipment:

2" king pin.

A galvanized steel bulkhead, height approx. 400 mm.

At the galvanized front bar yellow-red air couplings.

4x wheel chokes with holder at the bulkhead.

A spare wheel with holder at the bulkhead.

Electro-hydraulic-aggregat.

Remote steering at the front and at the rear through cable remoe control with push buttons, with control of the adjustment of the axles. (without installation in the truck)

U-beams at the rear of the gooseneck to hook in ramps (aluminium).

ECE-shields (red-yellow) at the rear of the trailer.

White contour marking according to EU regulations at both sides and at the extendable beam, red contour marking at the rear.

At the gooseneck and at the ramps holder and sockets for warning plates on both sides.

A Holder for beacon light at the rear of the trailer.

Galvanized support legs at the rear under the chamfer.

Operation valves for the ramps on the right side of the trailer.

A dirt trap at the rear of the trailer.

On the gooseneck drop-sides (aluminium) on both sides and at the rear, pluggable approx. 2.440 x 400 mm (L x H). The galvanized rear stanchions are removable. (Total length approx. 2.560 mm).

4 pairs of WADER-container pockets in the loading floor for a 20ft, 2x 20ft ,40ft or a 45ft container.

7 pairs of stanchion pockets for stanchions 100 x 50 mm in the outer frame of the loading floor.

Galvanizes side extensions, extends approx. 230 mm on each side.

A tool box INOX 1.500x390x810 under the loading floor on the right side.

1st axle as lifting axle with control through TEBS E according to the axle load and the current loading condition.

Central lubrication system BEKAMAX (Pico) with removable protection around the pump.

4 extendable (approx. 400 mm) warning plates 423 x 423 mm with one LED-marker light. On the warning plates one pin for beacon light each.

Wireless remote control for the remote steering additionally to the cable remote control, with LED lights at the receiver to control the adjustment of the steering.

Spped labels „80 km/h“ at the rear and at both sides.

Pressure gauge to see the axle load (load chart included).

HRM Metallisation (High Resistance Metallisation) of the outer frame. Complete steel construction are shot blasted, afterwards the visible defined surfaces are hot refined with ZINACOR 850 (zinc 85% - aluminium 15%).

 Email  Appeler

Contacter le vendeur

J'accepte le traitement et l'utilisation de mes données personnelles. Nos Conditions d'utilisation et notre Politique de confidentialité

Vortre mesage a été envoyé. Le vendeur vous répondra dès que possible.

Avez-vous besoin d'expédition?

Obtenir un devis d'expédition

LIVRAISON
Allemagne, Martener Hellweg 100, 44379 Dortmund, Germany
Heure locale de vendeur:
07:29
4.6
33 avis
Fiable
12 Plus de 12 ans avec Truck1

Contacter le vendeur

J'accepte le traitement et l'utilisation de mes données personnelles. Nos Conditions d'utilisation et notre Politique de confidentialité

Vortre mesage a été envoyé. Le vendeur vous répondra dès que possible.

Avez-vous besoin d'expédition?

Obtenir un devis d'expédition

LIVRAISON
En poursuivant la navigation sur ce site, vous confirmez votre consentement et votre autorisation du traitement de vos données personnelles, y compris l’utilisation des cookies et d’autres techniques de traçage. C’est destiné à l’amélioration et à la personnalisation de votre expérience sur ce site, nos autres sites et les sites des autres annonceurs qui collaborent avec nous. Nos partenaires peuvent aussi garder des cookies sur votre dispositif ou utiliser les autres techniques de collecte et de traitement des informations personnelles. Vous pouvez savoir plus sur nos moyens de traiter vos données personnelles.
t1 old test unit
t1 test unit - Semi-trailer
t1 test unit - HEAVYTRAILER AG